Description
The AVN-TB6 is a 6 channel talkback intercom control unit from the Sonifex AVN range of IP based products. The AVN-TB6 is a freestanding version which can be rackmounted with the AVN-TB6RK 1U rack kit. There is also a desktop version, the AVN-TB6D which can be fitted flush into a work surface if required. Both models offers similar functionality.
This unit provides broadcast quality audio communication between studios, offices and different areas in a facility or building complex, using RAVENNA/AES67 as the transport mechanism, allowing simple CAT 5 cabling and expansion. RAVENNA (of which AES67 is a subset) allows for the distribution of audio across a network. The AVN range use RAVENNA as the communication method providing compatibility with other AES67 systems.
Each of the 6 channels on the AVN-TB6 can be configured to provide communications with other remote networked units, and an independently configurable ‘page’ function can contact selected units with priority over standard intercom calls if required.
There is a monitor channel that can route the audio from an AoIP source to the headphones and speaker. This could be used to take an IFB feed or an off-air transmission signal or simply to listen to any audio source.
A user configurable GPIO system, with 10 physical ports and 10 virtual ports, can be used to control operational functions on local or networked units, or drive outputs as selected states change, and a voltage free relay contact can be used to operate external equipment.
A built-in web server provides complete configuration control of the units and also allows for firmware updates and configuration backup. An Ember+ interface also gives access to the configuration options as well as providing remote control and monitoring of the GPIO and virtual GPIO ports.
*The AVN-TB6 Can Be Fitted With the optional AVN-TB6RK 1U Rack Kit (Not Shown)
Webserver Software
The Sonifex AVN-TB6 has a built-in webserver for setup and configuration. The webserver is responsive, and resizes depending on the size of your screen, meaning that it can be used on large monitors or small handheld devices such as smart-phones. Help information is shown on the right hand side of the screen so it’s a good place to go to find out how the unit operates.
Category: AES67/Dante AoIP Products.
Product Function: Provides broadcast quality audio communication using RAVENNA/AES67 as the transport mechanism, allowing simple CAT 5 cabling and expansion.
Typical Applications: Ideal for broadcast quality audio communication between studios, offices and different areas in a facility or building complex.
Features
- 6 illuminated key-cap Talk buttons plus Listen & Page buttons.
- Dual 1Gb Ethernet & 1Gb SFP port.
- Mic & headset inputs, headphone & speaker outputs with volume control.
- Loudspeaker & Mic Mute buttons.
- Dual AC & DC power supply inputs.
- Advanced echo cancellation & mic AGC to prevent acoustic feedback.
- 10 user assignable GPIO ports.
- Responsive design Ethernet webserver.
- AVN-TB6RK 19” rack kit available.
Specification For AVN-TB6 |
|
Audio-Over-IP Specification |
|
Open Standards: | RAVENNA, AES67 |
Device Discovery: | Bonjour (mDNS / DNS-SD) |
Audio Delivery: | RTP/UDP over IPv4 multicast |
QoS: | DiffServ |
Stream Management: | RTSP/SDP |
Control: | Ember+/Webserver |
Format: | Linear PCM 24-bit (L24) |
Channels Per Stream: | 2 |
Frames Per Packet: | 48 |
Transit Streams: | 1 (fixed) |
Sample Rate: | 48 kHz |
Ember+ Interface Connection |
|
Interface Type: | Provider |
Network Interface: | Ethernet port and AoIP port |
Port: | 9000 |
Timing Synchronisation |
|
Profile Support: | Default, AES67 Media & Custom profiles |
Timing Protocol: | PTPv2, IEEE1588-2008 |
Microphone and Headset Input |
|
Input Impedance: | > 2.5kΩ balanced |
Gain Range: | 0dB to +60dB |
0dBFS Line-Up: | Adjustable in steps of 3dB from -58dBu to +2dBu |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
Noise: | -127dBu, 20kHz BW, Rs=200Ω ref. 76dB gain |
Headphone Output |
|
Output Impedance: | Drives 150mW into 32Ω to 600Ω headphones |
0dBFS Line-Up: | +20dBu |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
THD+N: | < -108dBFS, -30dBFS, 20Hz to 20kHz, unity gain, 20kHz BW |
Noise: | -110dBFS, 20kHz BW |
Loudspeaker |
|
Power Output: | 4W |
Volume: | Mute to full volume via front panel control |
Connections |
|
Microphone: | XLR-3 pin female (electronically balanced) |
Headphone: | ¼ inch (6.35mm) stereo jack socket |
Headset: | 1 x XLR-5 pin female (electronically balanced input) |
GPIO: | 15-way ‘D’-type socket |
Network: | 2 x gigabit Ethernet, RJ45 1 x SFP |
Mains AC Input: | Universal filtered IEC, continuously rated 85-264VAC, 47-63Hz, 20W |
DC Input: | 4 pin 7.5A power jack socket, 10-14VDC |
Fuse Rating: | Anti-surge fuse 2A 20mm x 5mm |
Equipment Type |
|
AVN-TB6: | 6 channel freestanding talkback intercom control unit with RAVENNA AoIP |
Physical Specification |
|
Dimensions: (Raw) | 25.5cm (W) x 19.4cm (D) x 4.4cm (H) (1U) 10.1” (W) x 7.7” (D) x 1.8” (H) (1U) |
Dimensions (Boxed): | 33cm (W) x 26cm (D) x 17cm (H) 13” (W) x 10.3” (D) x 6.7” (H) |
Weight: | Nett: 2kg Gross: 3kg Nett: 4.4lbs Gross: 6.6lbs |
Accessories |
|
AVN-DC060: | 60W DC power supply for AVN range with KPJX-4S plug |
AVN-TB6RK | 1U Rack Kit |
CM-GM1: | Professional Gooseneck Condenser Microphone |